Please use this identifier to cite or link to this item: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/10980
Full metadata record
DC FieldValueLanguage
dc.creator.IDVILAR, M. A.pt_BR
dc.creator.Latteshttp://lattes.cnpq.br/2149784881434285pt_BR
dc.contributor.advisor1VIEIRA, Lucianna da Gama Fernandes.-
dc.contributor.advisor1IDVIEIRA, L. G. F.pt_BR
dc.contributor.advisor1Latteshttp://lattes.cnpq.br/9021473205267343pt_BR
dc.contributor.advisor2COSTA, Ana Cristina Figueiredo de Melo.-
dc.contributor.referee1LIRA, Hélio de Lucena.-
dc.contributor.referee2BRITO, Maria do Socorro Leite de.-
dc.description.resumoEsta dissertação teve como objetivo o estudo da síntese e caracterização de pós de TiO2 obtidos pelo método Pechini, visando o desenvolvimento de membranas cerâmicas para aplicação no tratamento de água. Para uma melhor compreensão do tema abordado.o trabalho foi dividido em três etapas. A primeira etapa consistiu na síntese e caracterização de pós de T1O2. Nesta etapa verificou-se que o método Pechini foi eficiente na obtenção de pós nanométricos (15,4 nm), puros e cristalinos. A segunda etapa foi referente ao desenvolvimento das membranas cerâmicas de TiO2. Verificou-se nesta etapa que a mudança no tipo de suporte tubular (seco ou umedecido em água) e a variação do tempo de colagem (30 e 60 segundos) na deposição da camada de TiO2, não apresentou variação no tamanho dos grãos e dos poros da camada de TiO2 depositada. Isto ocorreu devido ao fato da camada depositada não ter sido homogeneamente distribuída sobre os suportes. Na ultima etapa realizou-se testes em escala de laboratório visando a aplicação das membranas cerâmicas de titânio no tratamento de água. Nesta etapa concluiu-se que as membranas testadas apresentaram boa seletividade, com valores de turbidez inferiores aos exigidos pela legislação da CONAMA, porém, com fluxo relativamente baixo.pt_BR
dc.publisher.countryBrasilpt_BR
dc.publisher.departmentCentro de Ciências e Tecnologia - CCTpt_BR
dc.publisher.programPÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICApt_BR
dc.publisher.initialsUFCGpt_BR
dc.titleObtenção de TiO2 pelo método Pechini visando o desenvolvimento de membranas cerâmicas para tratamento de água.pt_BR
dc.date.issued2004-
dc.description.abstractThe aim of this work is to study the synthesis and characterization of TiCb powder by the Pechini method, to be used to ceramic membranes for application in the water treatment. For one better understanding of the boarded subject, the work was divided in three stages. The first stage consisted of the synthesis and characterization of powder of TiC^. In this stage it was verified that the Pechini method was efficient in the obtaining of nanosized powder (15,4 nm), pure and crystalline. The second stage was referring at the development of the ceramic membranes of TiC«2. It was verified in this stage that change in the type of tubular support (dry or humidified in water) and the variation of the time of slip (30 and 60 seconds) for the deposition of the layer of Ti02, did not present variation in the size of grain and neither of the pores of the layer of deposited TiC>2. It was because the deposited layer didn't be homogeneity distributed on the supports. In the last stage were made tests in laboratory scale, aiming at to the application of the titanium ceramic membranes in the water treatment. In this stage it was concluded that the tested membranes had presented good selectivity, with turbidez values less than the CONAMA'S legislation, however, with relatively low flow.pt_BR
dc.identifier.urihttp://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/10980-
dc.date.accessioned2020-01-16T11:02:21Z-
dc.date.available2020-01-16-
dc.date.available2020-01-16T11:02:21Z-
dc.typeDissertaçãopt_BR
dc.subjectTiO2-
dc.subjectMétodo Pechini-
dc.subjectMembranas Cerâmicas-
dc.subjectTratamento de Água-
dc.subjectAlumina-
dc.subjectBarbotina de Titânio-
dc.subjectIsotermas-
dc.subjectAdsorção-
dc.subjectPechini Method-
dc.subjectCeramic Membranes-
dc.subjectWater Treatment-
dc.subjectAluminum-
dc.subjectTitanium Slip-
dc.subjectIsotherms-
dc.subjectAdsorption-
dc.rightsAcesso Abertopt_BR
dc.creatorVILAR, Mabelly Araújo.-
dc.publisherUniversidade Federal de Campina Grandept_BR
dc.languageporpt_BR
dc.title.alternativeTiO2 obtained by Pechini method aiming the development of ceramic membranes for water treatment.pt_BR
dc.identifier.citationVILAR, Mabelly Araújo. Obtenção de TiO2 pelo método Pechini visando o desenvolvimento de membranas cerâmicas para tratamento de água. 2004. 98f. (Dissertação de Mestrado em Engenharia Química), Programa de Pós-graduação em Engenharia Química, Centro de Ciências e Tecnologia, Universidade Federal de Campina Grande - Paraíba - Brasil, 2004. Disponível em: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/10980pt_BR
Appears in Collections:Mestrado em Engenharia Química

Files in This Item:
File Description SizeFormat 
MABELLY ARAUJO VILAR - DISSERTAÇÃO PPGEQ CCT 2004.pdfMabelly Araújo Vilar - Dissertação PPGEQ 2004. 5.52 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.