Please use this identifier to cite or link to this item: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/11468
Full metadata record
DC FieldValueLanguage
dc.creator.IDPEREIRA, M. T. B.pt_BR
dc.contributor.advisor1MACIEL, Theóphilo Moura.-
dc.contributor.advisor1IDMACIEL, T. M.pt_BR
dc.contributor.advisor1Latteshttp://lattes.cnpq.br/947685893835184pt_BR
dc.contributor.referee1CASTRO, Walman Benício de.-
dc.contributor.referee2LEITE, Josinaldo Pereira.-
dc.description.resumoUtilizando a técnica Melt Spinning de solidificação rápida, foi produzida uma fita AgCuTi com espessura de aproximadamente 100 fim e largura dc 3 mm com a finalidade de avaliar sua eficiência como material de adição na junção de AI2O3 com uma liga metálica FcNiCo de baixa expansão térmica. A fita foi caracterizada microestruturalmente por Raio-X e microscopia eletrônica de varredura (MEV). Para a junção dos materiais bases foi utilizado 0 processo de brasagem direta com metal ativo. Variou-se o grau de acabamento das superfícies cerâmicas utilizadas entre como sinterizadas, ou seja, sem nenhum acabamento, lixadas e polidas. As amostras foram brasadas em forno de alto vácuo. A analise química e microestrutural das amostras foi realizada por microscopia Ótica (MO) e MEV nas regiões da interfaceAbOj/AgCuTi/FcNiCo. Nas interfaces observadas não foram detectados defeitos associados a falta de ligação entre materiais bases e de adição 0 que confirma a boa eficiência da liga AgCuTi na junção metal/cerâmica. Além disso, a caracterização da fita apos brasagem, indicou uma microestrutura mais refinada e bem mais distribuída que aquela observada nas fitas obtidas por meios convencionais.pt_BR
dc.publisher.countryBrasilpt_BR
dc.publisher.departmentCentro de Ciências e Tecnologia - CCTpt_BR
dc.publisher.programPÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICApt_BR
dc.publisher.initialsUFCGpt_BR
dc.titleBrasagem de AI2O3/FeNiCo utilizando como metal de adição uma liga AgCuTi obtida por solidificação rápida.pt_BR
dc.date.issued2003-03-27-
dc.description.abstractIn this work a rapidly solidified ribbon of AgCuTi was developed to be used as filler metal in ceramic/metal joining using active brazing metal process. The ribbons, with thickness of approximately 100 pm and width of 3 mm, was obtained by using the melt spinning technique and characterized for structural investigation by X-Ray and scanning electron microscopy (SEM). To evaluate the influence of the ceramic surface, the brazing was done using as sintered, sanded and polished ceramic surfaces. The samples were brazed in high vacuum furnace. The microchemical and structural analysis of the samples was accomplished by optical microscopy (OM) and SEM in the interface Al203/AgCuTi/FcNiCo. It was not detected any fails of lack of union between the base materials and filler metal for all of kind of surface, what indicates a good adherence. Besides, the analysis of the ribbon obtained by RS presented a more refined and distributed microstructure when compared with ribbon obtained by conventional process.pt_BR
dc.identifier.urihttp://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/11468-
dc.date.accessioned2020-02-03T18:25:18Z-
dc.date.available2020-02-03-
dc.date.available2020-02-03T18:25:18Z-
dc.typeDissertaçãopt_BR
dc.subjectSolidificação Rápida-
dc.subjectBrasagem de AI2O3/FeNiCo-
dc.subjectMetal de Adição-
dc.subjectLiga AgCuTi-
dc.subjectMelt Spinning - Técnica-
dc.subjectJunção Metal/Cerâmica-
dc.subjectRapid Solidification-
dc.subjectAl203/FcNiCo Brazing-
dc.subjectAddition Metal-
dc.subjectLiga AgCuTi-
dc.subjectMelt Spinning - Technique-
dc.subjectMetal/Ceramic Junction-
dc.rightsAcesso Abertopt_BR
dc.creatorPEREIRA, Manoel Teodoro Baletardo.-
dc.publisherUniversidade Federal de Campina Grandept_BR
dc.languageporpt_BR
dc.title.alternativeAI2O3 / FeNiCo brazing using an AgCuTi alloy obtained by rapid solidification as the addition metal.pt_BR
dc.identifier.citationPEREIRA, Manoel Teodoro Baletardo. Brasagem de AI2O3/FeNiCo utilizando como metal de adição uma liga AgCuTi obtida por solidificação rápida. 79f. (Dissertação de Mestrado), Programa de Pós-graduação em Engenharia Mecânica, Centro de Ciências e Tecnologia, Universidade Federal de Campina Grande - Paraíba - Brasil, 2003. Disponível em: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/11468pt_BR
Appears in Collections:Mestrado em Engenharia Mecânica.

Files in This Item:
File Description SizeFormat 
MANOEL TEODORO BALETARDO PEREIRA - DISSERTAÇÃO PPGEM 2003.pdfManoel Teodoro Baletardo Pereira - Dissertação PPGEM 200311.97 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.