Please use this identifier to cite or link to this item: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/8434
Title: Estudo da viabilidade de endurecimento de aços utilizando uma tocha de plasma como fonte energética.
Other Titles: Feasibility study of steel hardening using a plasma torch as an energy source.
???metadata.dc.creator???: LOHOCA, João.
???metadata.dc.contributor.advisor1???: CASTRO, Walman Benício de.
???metadata.dc.contributor.advisor2???: ALVES JUNIOR, Clodomiro.
???metadata.dc.contributor.referee1???: LIMA, Severino Jackson Guedes de.
???metadata.dc.contributor.referee2???: MACIEL, Theophilo Moura.
Keywords: Endurecimento de Aços;Tocha de Plasma;Fonte Energética;Aços - Taramentos Tármicos;Resfriamento;Aquecimento;Steel Hardening;Plasma Torch;Energy Source;Steels - Thermal Targets;Cooling;Heating
Issue Date: 8-Jun-2001
Publisher: Universidade Federal de Campina Grande
Citation: LOHOCA, João. Estudo da viabilidade de endurecimento de aços utilizando uma tocha de plasma como fonte energética. 2001. 98f. (Dissertação de Mestrado em Engenharia Mecânica), Curso de Pós-Graduação em Engenharia Mecânica, Centro de Ciências e Tecnologia, Universidade Federal da Paraíba – Campus II - Campina Grande - PB - Brasil, 2001. Disponível em: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/8434
???metadata.dc.description.resumo???: 0 presente trabalho apresenta fundamentalmente o estudo da possibilidade e viabilidade de endurecimento superficial de aços empregando como fonte energética uma tocha de plasma pulsado. O trabalho ora desenvolvido se divide em duas etapas: i) Levantamento dos perfis térmicos de aquecimento e resfriamento traçados a partir dos dados de tempo e temperatura, objetivando quantificar a taxa de aquecimento e resfriamento, bem como a temperatura em que as amostras foram submetidas. ii) Análise qualitativa dos efeitos da ação de uma tocha de plasma sobre as microestruturas dos aços SAE 420 e SAE 4340. Na primeira etapa verificou-se que para uma mesma energia da tocha ha modificações do gradiente térmico quando se varia o tempo ligado, i.e., a razão cíclica (tp/T). As temperaturas máximas aumentaram com o fator energia, bem como as taxas de resfriamento. Na segunda etapa foi constado que apos o aquecimento e subsequente resfriamento os testes de microdureza indicaram aumento significativo na dureza superficial. A condição de trabalho originou durezas mais significativas que foi (1=18 A; Ib=2 A; f=10 kHz e tempos que variaram de 5 a 25 segundos). O equipamento de plasma usado em nosso laboratório (LabPlasma - Laboratório de Processamento de Materiais por Plasma/UFRN) possui uma fonte de tensão pulsada com grande versatilidade, através de controles eletrônico/digital, podemos controlar vários parâmetros do plasma: corrente, frequência, tempo ligado (ton), tempo desligado (toff), entre outros.
Abstract: The present work presents fundamentally the study of the possibility and viability of superficial hardening of steels using as energy source a torch of pressed plasma. The work for now developed if it divides in two stages: i) Rising of the thermal profiles of heating and cooling traced starting from the data of time and temperature, aiming at quantize the heating rate and cooling, as well as the temperature in that the samples were submitted, ii) qualitative Analysis of the effects of the action of a plasma torch on the microstructures of the steels SAE 420 and SAE 4340. In the first stage it was verified that there are modifications of the thermal gradient for a same energy of the torch when this linked time is varied. The maximum temperatures increased with the factor energy, as well as the cooling rates. In the second stage it was consisted that after the heating and subsequent cooling the tests of hardness indicated significant increase in the superficial hardness. The work condition that originated more significant hardness than it was (1=18 A; Ib=2 A; f=10 kHz and times that varied from 5 to 25 seconds). The plasma equipment used in our laboratory (LabPlasma - Laboratory of Processing of Materials for Plasma/UFRN) it possesses a tension source pulsed with great versatility, through electronic/digital controls, we can control several parameters of the plasma: current, frequency, tied up time (ton), turned off time (t0ff), among others.
Keywords: Endurecimento de Aços
Tocha de Plasma
Fonte Energética
Aços - Taramentos Tármicos
Resfriamento
Aquecimento
Steel Hardening
Plasma Torch
Energy Source
Steels - Thermal Targets
Cooling
Heating
???metadata.dc.subject.cnpq???: Engenharia Mecânica
URI: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/8434
Appears in Collections:Mestrado em Engenharia Mecânica.

Files in This Item:
File Description SizeFormat 
JOÃO LOHOCA - DISSERTAÇÃO PPGEM 2001.pdfJoão Lohoca - Dissertação PPGEM 200114.57 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.