Preparação de protetores solares com argila: análise da eficácia in vitro da propriedade fotoprotetora.

Abstract

Non-ionizing radiation (UV-A, UV-B and UV-C) of the sun's electromagnetic spectrum cause diseases to human and must be avoided. The proper use of sunscreen minimizes this problem. Currently, the trend is to introduce natural materials, organic or inorganic, in the composition of sunscreens, in order to neutralize possible side effects of synthetic materials. Studies have shown that clays (layered silicates) incorporated in sunscreens can block ultraviolet radiation in 250 to 400 nm wavelength range depending on the clay composition. Following this guideline, in this work, two clays were used in the preparation of sunscreen and its effectiveness was determined at Universidade Federal de Campina Grande (UFCG) laboratory through in vitro evaluation by spectrophotomery. The clays tested were Cloisite® Na + sodium montmorillonite and Argel 35 bentonite. The formulations were prepared in pharmacies in three different cities, Guarabira, Joao Pessoa and Campina Grande, in Paraíba state. The method chosen to evaluate the Sun Protection Factor (SPF) was in vitro method, developed by Mansur, due to the excellent correlation with in vivo method. Besides, there are other advantages like low cost and less damage to health since the volunteer is not exposed to the experiments. Before the evaluation of SPF of prepared formulations with the clay, the SPF of commercial sunscreens was determined and it was confirmed that the in vitro method was proper to define sunscreen SPF. The introduction of clay in the sunscreens composition, as natural materials, replacing TiO2 synthetic material was effective, especially for Argel bentonite clay. The legitimacy of studying the photoprotective effect of clay materials in the composition of sunscreens is justified by great social relevance, since they are inexpensive and found easily in nature.