dc.creator.ID |
LEAL, T. L. |
pt_BR |
dc.creator.Lattes |
http://lattes.cnpq.br/1894550110012250 |
pt_BR |
dc.contributor.advisor1 |
CARVALHO, Laura Hecker de. |
|
dc.contributor.advisor1ID |
CARVALHO, L. H. |
pt_BR |
dc.contributor.advisor1Lattes |
http://lattes.cnpq.br/6358009621640820 |
pt_BR |
dc.contributor.referee1 |
BARBOSA SOBRINHO, Ariosvaldo Alves. |
|
dc.contributor.referee2 |
ARAÚJO, Gilmar Trindade. |
|
dc.description.resumo |
Blendas poliméricas tem grande interesse industrial por serem um método
barato e eficiente de modificação das propriedades de polímeros. A escolha dos
componentes de uma blenda permite o ajuste das suas propriedades a fins
específicos. A tendencia atual da industria química e a crescente utilização de derivados
da biomassa ou seja, produtos de origem vegetal de fonte renovável, no
desenvolvimento de novos produtos em substituição aos derivados de petróleo. No presente trabalho foram desenvolvidas blendas de poliéster
insaturado/poliuretano (blendas UP/PU) com o objetivo de obter produtos, a base
de poliéster, mais tenazes. Investigou-se blendas compostas de um único poliéster
insaturado e três poliuretanos distintos. Os poliuretanos empregados neste
trabalho provem de fontes renováveis, e foram obtidos pela reação de polióis
derivados do óleo de mamona, com diferentes teores de hidroxila, com um pré-polímero
contendo grupos funcionais isocianato também derivado do óleo de
mamona. As propriedades mecânicas (em tração e impacto) das blendas foram
investigadas em função do tipo e teor de PU, bem como de pós-cura por 1h a
duas temperaturas distintas (80 e 150°C). As blendas foram inspecionadas
visualmente e caracterizadas por espectroscopia no IV (FTIR) e suas superfícies
de fratura foram analisadas por MEV. Os resultados obtidos indicam que blendas UP/PU, a base de poliéster
insaturado, geram produtos mais tenazes e que, em geral, para os sistemas
investigados:1) a RT e resistência ao impacto das blendas que não foram pós
curadas tenderam a aumentar com a reatividade (teor de hidroxila) do poliol usado
na síntese do PU; 2) o modulo e o alongamento eram independentes do tipo de
PU; 3) a elevados teores (15%) de PU a segregação de fases foi evidente; 4) as
propriedades de todos os sistemas investigados tenderam a diminuir com a pós-cura
em altas temperaturas (150°C); 5) um melhor conjunto de propriedades foram
obtidas para as blendas pós-curadas a 80°C por 1 h; 6) propriedades de impacto
otimizadas foram obtidas para blendas contendo 10% de PU. |
pt_BR |
dc.publisher.country |
Brasil |
pt_BR |
dc.publisher.department |
Centro de Ciências e Tecnologia - CCT |
pt_BR |
dc.publisher.program |
PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA |
pt_BR |
dc.publisher.initials |
UFCG |
pt_BR |
dc.title |
Tenacificação do poliéster insaturado pela incorporação de uretano. |
pt_BR |
dc.date.issued |
2001-03 |
|
dc.description.abstract |
There is a strong industrial interest on the development of polymer blends as this
is a low cost and efficient method to modify polymer properties. The appropriate
choice of components allows the adjustment of the properties of the blend to
specific needs.
Nowadays the use of biomass derivatives by the chemical industries is growing
steadily as these vegetable products and byproducts come from renewable
sources and are substituting petroleum based products.
In the present work, unsaturated polyester/polyurethane blends (UP/PU blends)
were developed with the aim to produce tougher polyester based products. Blends
of a single commercial unsaturated polyester and three different polyurethanes
were investigated. The polyurethanes employed in this work come from natural
sources and were obtained by reacting poliols, derived from castor oil, having
distinct hydroxyl content, with an isocyanate capped pre-polymer also derived from
castor oil.
The mechanical properties (tensile and impact) of the blends were investigated as
a function of polyurethane kind and content as well as of post-curing for one hour
at two different temperatures (80 and 150°C). The blends were visually inspected
and characterized by fourier transform infra-red spectroscopy (FTIR) and their
fracture surfaces analyzed by scanning electron microscopy (SEM).
The results obtained indicate that tougher polyester based products can be
obtained by blending with polyurethane and that, in general, for the systems under
investigation: 1) both the tensile and the impact strengths of the blends which were
not post-cured, tended to increase with the reactivity (hydroxyl content) of the
polyol employed in the synthesis of the polyurethane employed; 2) the modulus
and the elongation at break were not dependent on the kind of PU used; 3) there
was strong phase segregation at higher (15%) PU contents; 4) the properties of all
systems investigated tended to decrease with post-curing at high (150°C)
temperatures; 5) better overall mechanical properties were obtained for the
systems post-cured for 1h at 80°C and 6) optimized impact properties were
achieved for the blends with 10% PU content. |
pt_BR |
dc.identifier.uri |
http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/11039 |
|
dc.date.accessioned |
2020-01-20T11:53:24Z |
|
dc.date.available |
2020-01-20 |
|
dc.date.available |
2020-01-20T11:53:24Z |
|
dc.type |
Dissertação |
pt_BR |
dc.subject |
Rede Polimérica |
|
dc.subject |
Uretano |
|
dc.subject |
Blendas Poliméricas |
|
dc.subject |
Propriedades Mecânicas |
|
dc.subject |
Temperatura |
|
dc.subject |
Resina Poliéster |
|
dc.subject |
Polímeros |
|
dc.subject |
Poliéster |
|
dc.subject |
Polymeric Network |
|
dc.subject |
Urethane |
|
dc.subject |
Polymer Blends |
|
dc.subject |
Mechanical Properties |
|
dc.subject |
Temperature |
|
dc.subject |
Polyester Resin |
|
dc.subject |
Polymers |
|
dc.subject |
Polyester |
|
dc.rights |
Acesso Aberto |
pt_BR |
dc.creator |
LEAL, Tânia Lúcia. |
|
dc.publisher |
Universidade Federal de Campina Grande |
pt_BR |
dc.language |
por |
pt_BR |
dc.title.alternative |
Tenacification of unsaturated polyester by incorporation of urethane. |
pt_BR |
dc.identifier.citation |
LELA, Tânia Lúcia. Tenacificação do poliéster insaturado pela incorporação de uretano. 2001. 97f. (Dissertação de Mestrado em Engenharia Química), Curso de Mestrado em Engenharia Química, Centro de Ciências e Tecnologia, Universidade Federal da Paraíba - Campus II Campina Grande - Brasil, 2001. Disponível em: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/11039 |
pt_BR |