Análise da deformação permanente de misturas asfálticas a partir dos critérios de Mohr Coulomb.

Abstract

Permanent deformation is defined as the accumulation of small amounts of non-recoverable deformation resulting from the application of vehicle loads. The permanent deformation in the surface layer of asphalt pavements can come from three mechanisms: permanent deformation by densification, by use and by creep of the mixture. Since the service temperatures of the pavement surface layer are around 40 and 60 ºC, the asphalt mixture, in this temperature range, behaves as a solid material. Therefore, it is reasonable to assume that failure mechanisms applicable to solid materials are valid for asphalt mixtures. As the Mohr-Coulomb criterion is widely used to describe the shear characteristics of solid materials, it can be used to obtain the internal friction angle of the asphalt mixture as well as to estimate its cohesive intercept. This work had as objective to determine the internal angles of friction of different asphalt mixtures and their influence on the mechanical behavior, in particular, on the resistance to permanent deformation of these mixtures. In order to achieve the objective of this research, an experimental program was developed to evaluate the mechanical properties related to the internal angle of friction of asphalt mixtures with the 50/70 asphalt binder and the E 55/75 asphalt binder. It was possible to perform laboratory analyses from the determination of shear rupture parameters, supported by the Mohr-Coulomb's theory, inferred by the performance of mixtures studied in the field. It was verified that, at each increment of 5% of coarse particles in a particle size range, the studied mixtures presented, in general, a gain of 1° (degree) in the internal angle of friction for each size range studied. However, the limit of 30 to 35% of coarse particles should be observed for each mixture. It can be concluded that: the parameters of shear rupture, internal angle of friction and cohesive intercept are determining factors in the permanent deformation performance of asphalt mixtures. For the asphalt binders used, the results indicated that the increment of the internal angle of friction results in a greater resistance to permanent deformation.