Estudo da modificação de argilas bentoníticas para aplicação em nanocompósitos de polietileno.

Abstract

High Density Polyethylene (HDPE) nanocomposites containing unmodified and modified bentonite clay were prepared by melt intercalation technique. Initially, four quaternary ammonium salts and three types of bentonitic clays were studied. Afterwards, one type of salt and one type of clay were chosen for the study. The clay was organophilized using 100,125 and 150wt% of quaternary ammonium salt based on cationic exchange capacity (CEC) of the clay. It was evident from the X-ray diffraction (XRD) that the salts were incorporated into the clay structure confirming its organophilization. In general, all salts may be used for clay organophilization and hence, on HDPE/Organophilic clay nanocomposites. However, it was verified that the type of anion present may influence the thermal stability of the quaternary ammonium salt. The nanocomposites were prepared in a counter-rotating twin screw extruder and the samples were prepared by injection molding. For the evaluation of the flammability, horizontal burn (UL-94HB) and cone calorimeter methods were used. The thermal behavior of the nanocomposites was analyzed by Heat Distortion Temperature (HDT) and Thermogravimetry (TG). XRD and Transmission Electron Microscopy (MET) techniques were used to characterize the morphology and analyze the degree of expansion of the prepared clays, and also the degree of exfoliation of the nanocomposites. Mechanical properties (Tensile and Impact strength) were also analyzed. Some compositions were extruded using two screw configurations of ZSK-30 co-rotacional extruder with the aim of improving the properties of the nanocomposites obtained by varying the processing conditions. It was observed that the percentage of the ammonium salt and the type of polar compatibilizer influence the final properties of the nanocomposites.