BEZERRA, D. C.; http://lattes.cnpq.br/2929092601742366; BEZERRA, Daniella Cibele.
Abstract:
One of the main problems of external electrical isolation is due to accumulation of contaminants on its surface. The occurrence of this event causes the insulation resistance of the surface decreases, increasing the flow of leakage currents on the surface. Among the techniques developed to reduce this type of event is the coating of the conventional existing insulator (porcelain or glass, as appropriate) with a silicone rubber vulcanized at room temperature (BS). The aim of this study was to develop a mixture of silicone rubber/ alumina trihydrate/nanosílica (BS/ATH:NS) for use in coating glass electrical insulators. Loads of ATH and NS were added to BS, producing a mixture made in different mass ratios (79/21, 77/23 and 75/25) BS/ATH:NS used in the coating of glass electrical insulators. Loads and coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), flammability test, measurement salt spray chamber, test of wettability and hydrophobicity. Loads showed distinct morphological features, which directly affects the morphology of the coatings. The silanization loads favored interaction among them, as there was a small improvement in the interaction of the loads with the BS. It was also observed that the flammability test, the coatings containing ATH showed more significant results, without burning. For tests of the salt spray chamber, coat with BS/20:1 and with silanized fillers had the lowest leakage current, which was confirmed by measuring the hydrophobicity, where they managed to recover the hydrophobicity HC = 1 (level of hydrophobicity) according to STIR (Swedish Transmission Research Institute) guide.