DSpace Repository

Mestrado em Ciência e Engenharia de Materiais.

Mestrado em Ciência e Engenharia de Materiais.

 

Recent Submissions

  • NASCIMENTO, E. P.; http://lattes.cnpq.br/8176311608210936; NASCIMENTO, Emanuel Pereira do. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM LETRAS EM REDE PROFLETRAS (UFRN)UFCGUniversidade Federal de Campina Grande, 2018-08-17)
    Tin oxide (SnO2) is a semiconductor metal oxide that has been extensively investigated and prepared in the form of nanofibers for application in photocatalysis, gas sensing, transparent electrodes for solar cells, among ...
  • SILVA, I. D. S.; SILVA, INGRIDY DAYANE DOS SANTOS.; DOS SANTOS SILVA, INGRIDY DAYANE.; http://lattes.cnpq.br/5675817448715747; SILVA, Ingridy Dayane dos Santos. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-05-08)
    The commercial and scientific applications of epoxy resins depend on the combination and reaction characters among resin/hardener/catalyst, forming a very complex reactive system. In this work, the epoxy compound based ...
  • DIAS, G.; http://lattes.cnpq.br/0096282519277341; DIAS, Geceane. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-07-20)
    The proposal to use a controlled release system as an alternative to conventional treatments aimed at administering antibiotics has gained strength in recent decades. The chitosan-based hydrogel, an antimicrobial biopolymer, ...
  • BASILIO, Sabrina Kelly Trajano. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-02-27)
    NiCuZn ferrites are materials that can be used in various applications in the technological area. The application as an absorber of electromagnetic radiation has stood out, since this material has excellent electrical ...
  • COSTA, F. P.; COSTA, Fabiana Pereira.; F. P. da Costa.; http://lattes.cnpq.br/6787424604737850; COSTA, Fabiana Pereira da. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-05-04)
    In recent times, the topic of environmental protection has received considerable attention, and this has stimulated the development of research involving the recycling of materials. Waste glass is among the materials ...
  • BARBOSA, S. T. R.; http://lattes.cnpq.br/4885542098738249; BARBOSA, Suzane Thaís dos Reis. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-05-06)
    The glass-ceramics have functional properties such as chemical durability and high mechanical hardness. Based on this, the recycling of sodium-lime glass, typical of packaging, for the production of glass-ceramics can ...
  • LIMA, L. K. S.; http://lattes.cnpq.br/3591582881501268; LIMA, Lizandra Karolyn Silva. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-21)
    Ceramic membranes present properties that provide high performance in filtration processes, however, the production cost is still high. Seeking to meet a current demand, this study aimed to develop ceramic masses, ...
  • PORTO, L. S.; http://lattes.cnpq.br/1110684652125408; PORTO, Leonardo Silva. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-07-07)
    The appropriate selection of the materials to be used and a process parameters correctly preset are factors that precisely reflect on the quality of the welded Tuckers Stud, process known as Stud Arc Welding (SW). This ...
  • CESARIO, L. V.; http://lattes.cnpq.br/4708265017487456; CESARIO, Luanna Vilela. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-28)
    Biodegradable plastics are a new class of polymers which have been extensively explored in order to minimize environmental problems and meet industrial requirements. One of the most promising biodegradable polymers for ...
  • SANTOS, L. N. R. M.; NATHIERE RANGEL DE MORAIS SANTOS, LARRISEA.; SANTOS, LARRISEA NATHIERE RANGEL DE MORAIS.; http://lattes.cnpq.br/8002123542572539; SANTOS, Larrisea Nathiere Rangel De Morais. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-02-18)
    Porous ceramics obtained by freeze-casting have been extensively studied because they make it possible to obtain materials with high porosity. However, most of the materials obtained have anisometric / oriented pores ...
  • NEPOMUCENO, N. C.; http://lattes.cnpq.br/4791142122621787; NEPOMUCENO, Neymara Cavalcante. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-22)
    Cellulose Nanofibrils (CNF) have a wide range of applications, since they have high aspect ratio, high crystallinity and mechanical properties besides the important properties of cellulose as low density, biodegradability ...
  • SOUZA, J. W. L.; JOSE, WILLIAM DE LIMA SOUZA.; DE LIMA SOUZA, JOSÉ WILLIAM.; http://lattes.cnpq.br/1859335554704650; SOUZA, José William de Lima. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-08-29)
    This work sought evaluating by thermal, chemical and kinetic models the influence of natural catalysts on epoxy resin cure; properties changes were quantified through mechanical and morphological tests. To this task, ...
  • RODRIGUES, J. F. B.; RODRIGUES, JOSÉ FILIPE BACALHAU.; BACALHAU RODRIGUES, JOSÉ FILIPE.; http://lattes.cnpq.br/4896638137311286; RODRIGUES, José Filipe Bacalhau. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-12-23)
    Burns, a term defined as tissue damage caused by heat, is a big public health challenge in Brazil and worldwide. A burn causes besides tissue loss, the possibility of infection generated by lesion and microorganisms, ...
  • CAVALCANTI, F. B.; http://lattes.cnpq.br/5762956202188573; CAVALCANTI, Felipe Barbosa. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-15)
    The development of polymer blends from biodegradable polymers is a proposal that has been growing in the search for products less harmful to the environment after their disposal. The present work deals with the manufacture ...
  • DUARTE, RAFAELLA RESENDE DE ALMEIDA.; http://lattes.cnpq.br/9545559834025082; DUARTE, Rafaella Resende de Almeida. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-08-27)
    The potential of several clays, including industrialized sodium bentonite and polycationic natural bentonites from deposits located in the Paraiban municipalities of Boa Vista, Cubati, Sossego and Olivedos, for protection ...
  • SOUZA, E. F.; http://lattes.cnpq.br/0509018307639812; SOUZA, Elaine Ferreira de. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-28)
    Artificial stones are particulate composite materials with high content of natural aggregates and a polymeric matrix, being widely used in civil construction. This class of stone has been in increasing demand all over ...
  • FERREIRA, E. S. B.; FERREIRA, EDUARDO DA SILVA BARBOSA.; FERREIRA, E.S.B.; http://lattes.cnpq.br/6980905769610776; FERREIRA, Eduardo da Silva Barbosa. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2020-02-17)
    Nowadays, tons of industrial wood residue are daily produced, and reusing this material otherwise would be discharged in the environment has become an economically viable and environmentally friendly alternative for new ...
  • GOMES, D. S.; GOMES, DÉBORAH S.; DOS SANTOS GOMES, DÉBORAH.; http://lattes.cnpq.br/5559901782833359; GOMES, Déborah dos Santos. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-22)
    Calcium phosphates have been extensively investigated for application in the biomedical field due to their bioactivity and biocompatibility. However, the brittle nature of these materials limits their application as ...
  • NUNES, R. A.; http://lattes.cnpq.br/9171908740383059; NUNES, Raquel Araújo. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-08-22)
    Among the electrochemical processes used in the electrolytic production of chlorine (Cl2) and caustic soda (NaOH), diaphragm technology is the most widely used in the world. For a long time, asbestos was the main material ...
  • LEITE, Raquel B.; http://lattes.cnpq.br/0194999097605374; LEITE, Raquel Barreto. (BrasilCentro de Ciências e Tecnologia - CCTPÓS-GRADUAÇÃO EM CIÊNCIA E ENGENHARIA DE MATERIAISUFCGUniversidade Federal de Campina Grande, 2019-02-18)
    This research proposed to evaluate the influence of the fuel type on the synthesis by combustion reaction at the temperatures 500 and 800 oC, aiming at obtaining calcium phosphates for biomedical applications. The fuels ...

View more